工藝方案 Process scheme
————————————————
全連續式球磨機工藝方案:將脊性料與塑性料分別預加工后進入連續式球磨機
(一),脊性料進球描述:
1.原料破碎至 3mm 后由裝載車輸送至標準料倉。
2.標準料倉底部配置皮帶秤,將配置好的物料經輸送帶送至中轉倉。
3.中轉倉根據球磨產量向連續球磨機供料。
Full continuous ball mill process scheme: the ridge material and plastic material are respectively pre-processed into the continuous ball mill
(A), ridge material goal description:
1. After the raw material is broken to 3mm, it is transported to the standard silo by the loading truck.
2. The bottom of the standard bin is equipped with a belt scale to send the configured materials to the transfer bin through the conveyor belt.
3. The transfer warehouse supplies materials to the continuous ball mill according to the ball mill output.
(二).化漿描述：
1,根據配方由喂料機向化漿連續球磨機輸送塑性料,同時按工藝設計添加適量的水分與塑性料一同化漿，
2.化漿連續球出漿,漿料經振動圓篩過篩后先行除鐵再輸送至地下漿池均化待用
3.化漿球出漿端設計有過濾錐桶,將原料中所含的雜質篩除
4.振動圓篩篩除漿料中所含的沙石顆粒并輸送至沙石倉統-外理
5,地下漿池的漿料根據工藝設計按配方、按產量經由柱塞泵向連續球磨機供漿
1, according to the formula from the feeder to the slurry continuous ball mill to transport plastic material, at the same time according to the process design to add the appropriate amount of water and plastic material assimilation slurry,
2. The slurry is continuously pelted out. After the slurry is sifted through the vibrating round screen, the iron is removed and then transported to the underground slurry pond for homogenization and waiting for use
3. A filter cone bucket is designed at the pulp end of the slurry ball to screen out the impurities contained in the raw materials
4. Vibrating round sieve sieve the sand particles contained in the slurry and transport them to the sand silo system - external processing
5, the slurry of the underground slurry tank is supplied to the continuous ball mill through the plunger pump according to the process design, according to the formula and the output
產品優點 Product advantage
————————————————
連續式球磨機與間歇式球磨機相比有如下優點
1.連續式球磨機最大的優點是節能、環保( 詳見能耗對比說明表 );
2.連續式球磨機通過不同球的研磨分工,逐漸研磨,粒度分布均勻,避免過磨;
3.在同樣產量規模下，連續式球磨機占地面積更少，大幅度減少投資;
4.可減少人工，并降低工人的勞動強度，節約卸料的時間;
5,由于連續式球磨機筒體內溫度的升高和動態出漿,使得出磨泥漿的粘度降低，從而減少了球磨物料的用水量和噴霧干燥塔的蒸發量，節能效果明顯。
The continuous ball mill has the following advantages over the intermittent ball mill
1. The biggest advantage of continuous ball mill is energy saving and environmental protection (see energy consumption comparison table for details);
2. Continuous ball mill through different ball grinding division, gradually grinding, uniform particle size distribution, avoid grinding;
3. Under the same production scale, continuous ball mill covers less area and greatly reduces investment;
4. Can reduce labor, and reduce the labor intensity of workers, save the time of unloading;
5, due to the rise in the temperature of the continuous ball mill cylinder and the dynamic pulping, the viscosity of the grinding mud is reduced, which reduces the water consumption of the ball mill material and the evaporation of the spray drying tower, and the energy saving effect is obvious.
設備能耗對比說明 Comparison of equipment energy consumption
————————————————
原料顆粒 10-20mm,成品漿料細度 250 目篩余 0.8-1.0
Raw material particles 10-20mm, fnished stock fneness 250 mesh screen size 0.8-1.0
